The D-V-S forum

Just a quick post to let you all know that the D-V-S forum is now up and running.

Click this link to go to the forum. Please register as a member and have your say on all things airgun or post your shooting pictures in the designated forum. Even if you just want help or advice on something airgun pop in and post...it shouldnt take long for you to get a answer to your questions.

So thats the "D-V-S FORUM" Join today and have your say.

The new Logun EVO

Whilst i was at the tackle and guns trade show i had the opportunity to shoot this, the new logun evo. It looks and feels like a rifle should and the shots were quick and very quiet.

The new generation Evo S16 features a shrouded barrel system and other major improvements to raise the rifle to new heights of technological superiority. The shrouded barrel system not only makes the rifle even quieter but also reduces the rifles overall weight. Amongst the improvements are a new cocking cycle that is smoother, new style gauge gives more accurate info on your air reserve. Improved trigger unit gives improved feel. The original issue with bottle o-rings has been resolved with a re-design incorporating the new thicker seal o-ring into the charging adaptor. This new Logun Evo S16-S takes an already superb rifle and in Logun tradition "Makes the Best Better"

New backstop.

I had some time on my hands so i made a new portable backstop. This backstop incorperates a knockdown target with backstop. Easy to build and has a load of room for paper targets and a shelf for other targets.

Ballistol podcast

The 2nd in the series of ballstol podcasts is now on youtube. Follow this link to view "The ballistol care cloth" podcast. http://www.youtube.com/watch?v=2jARnx--ckI

WEIHRAUCH HW80 STRIPDOWN

As i had a little time this week i set about stripping down my No2 rifle, the hw80 .22. The spring was in need of replacing so i stripped it down to its component parts. Now the spring is in and the following photos show how it was done. Please note that this is a help topic and i am posting this as advice only. I shall not be held responsible for and loss or injury sustained by following this procedure.

First remove the stock and the scope. You are left with the action and barrel.Then remove the barrel hinge bolt , removing the barrel and the shims ,then slide out the piston guide bar.

Now for the trigger unit. Using a center punch drift out the retaining pins that hold the unit in place. As you remove the unit be sure to withdraw the safety, making sure that the spring on the end comes out with it.

Put a screw driver through the barrel mount bolt holes and, using another flat ended screwdriver, give a sharp push down on the trigger block to unscrew it from the action. Using your towel or cloth, unscrew the block until it`s almost off. NOW TAKE CARE WITH THE NEXT BIT AS THE MAIN SPRING COULD BE UNDER PRELOAD, THUS THE TRIGGER BLOCK WILL BE PUSHED OFF WITH FORCE.( Please note that this is only intended as a help topic and as such i am not liable for any injury sustained during this operation. If you are unsure how to do any work on your rifle take it to a RFD and let them do the required work for you.)

You should find that the trigger block comes away quite easily if it has the original main spring fitted, but if a replacement spring has been put in then take care as this will be much stronger.

Withdraw the spring and the piston. Check the piston seal for wear and tear and if you need to replace it.
To rebuild just reverse this procedure and when it comes to putting in the trigger unit, push down the top bar on the unit to engage the trigger as it was to fire. Then when you put the safety catch back in, pulling the trigger as to fire Will hold the safety in place. Replace the longer pin in the front most hole as this makes it easier to position the unit for the rear pin to be inserted.
Remember...if you are unsure do not attempt to disassemble your rifle but take it to a RFD and let them do the work for you. I am experienced in this sort of thing so this is how i do mine, but i have added this post as a help topic for you i you feel confident enough to give it a go.

Remember...SAFTEY FIRST !

The Tackle and Guns tarde show 2008

This was the first year for the Ballistol team had attended the trade show and i must say it was great to see so many people interested in the oil. Through the day i did some 60 demos of the ballistol range on my own rifle and everyone was astounded with the finish. We are hopeful that sales will pick up now the retail and trade people within this industry have seen it in action. If you need help choosing between any of the range then feel free to ask my advice, bu if you buy the care cloths and the universal spray you have everything you will need for the upkeep of your rifle.

Email me Technical@ballistoluk.co.uk with your questions.

Here are a few pics of our stand at this years t&g trade show.

Ballistol podcast.

I am pleased to announce that the first in the series of podcasts are now on the Ballistol blog.

If you click the photo, it shoud take you to the podcast.

If you cant view the podcast from here, go to http://uk.youtube.com/watch?v=McFs2inDFbU to view it.

More to come from Ballistol and DVS so watch this space

The guest book

If you find our site interesting and helpfull, please leave a message in our guest book. By clicking on the RED link on the right , you can add your comments and remarks. You can also use the comments tab at the bottom of this and every post. We have a new section on the site too, if you want to you can now become one of our followers, showing your support to the D-V-S team and also letting other visitors to the site see that we have a great blog full of help and ideas.
Thanks for reading and please keep coming back.

Richard

Oh and dont forget to visit the Ballistol website where there are new products now available. I dont use anything else on my rifles because the ballistol care cloth does it all. Link at the bottom of this link and if you click on any of the ballistol pitures that too will take you to the Ballistol home page.
Ballistol oil....Does the job of many, with just one wipe.

myxi in rabbits

As i am sure you are all aware, myxi is nasty virus that affects rabbits. The following was posted last year but i thought i would repost it for you all.


The disease myxomatosis in rabbits is caused by a virus. The virus is a type of pox virus which grows best in the skin of rabbits.The very first signs we can see are puffy, fluid swellings around the head and face. 'sleepy eyes' are a classic sign along with swollen lips, tiny swellings on the insides of the ear and puffy swellings around the anus and genitalia. Within a day or so, these swellings can become so severe as to cause blindness and there may become some distortion around the face, mouth, ears and nose.A major insect parasite which transmits the disease in this country is the rabbit flea. Although this has never been proved, there is strong circumstantial evidence that mosquitoes transmit Myxomatosis in the United Kingdom. Myxomatosis virus can remain alive in the blood of fleas for many months and it is probably by over wintering of fleas in rabbit burrows the disease is transmitted from year to year.As the mosquito or flea bites the rabbit a small amount of the live virus is placed in the skin of the rabbit as the insect sucks blood. Within a few days the virus is transmitted to a local lymph node and then passes into the blood of the rabbit which enables it to be moved around to several sites. The virus mainly multiples in the skin around the eyes, the nose, the face, the soft skin inside the ears and also the skin around the anus and genitals of the rabbit.The incubation period varies slightly from one animal to another but can be as short as five days and as long as fourteen days. Some animals may survive for weeks or months after infection but, in general, if the infection is severe in a susceptible rabbit, death occurs within twelve days.Within a short space of time, affected rabbits become blind because of the swelling around the eyes and for this reason feeding and drinking is often difficult. However, one can sometimes see wild rabbits suffering from Myxomatosis quietly grazing. Of course, at this stage many rabbits become prey to animals such as foxes and other predators. Other rabbits may well become injured or killed on roads but the common cause of death is a secondary lung infection which often occurs around day eight after the initial incubation of the disease.Not all affected rabbits die. Although recovery is rare in the wild (probably less than 10% of wild rabbits eventually recover from myxomatosis).It is easy to spot infected rabbits as they will stay out in the open in daylight, apparently grazing happily, the real reason they are in the open is that they are blind and are having difficulty breathing as their lungs slowly fill with liquid.Look for the closed and weeping eyes.I approach them quietly from downwind and despatch them with a well placed head shot.
As a matter of course I despatch all 'Myxi' infected rabbits that I find , I bag them up and remove them from the field.